High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless Impact Driver has been designed so that you can work smarter, not harder. With 6 optimized fastening controls each mode tailors the driver speed and impact rate to the task at hand.
The 40V Max. Brushless 125mm (5”) Paddle Switch Angle Grinder delivers cutting speeds up to 40% faster then the 18V equivalent.
Re-designed to withstand harsh conditions the GA013G is highly durable with advanced protection against heat and dust. The improved heat dissipation capacity allows for continuous heavy duty operation. In addition there are a number of enhanced safety features
including Active Feedback Sensors that will shut down the tool in the event of kickback. As well as soft start, anti-restart and an electric brake that will rapidly stop the wheel rotation for safe user operation.
The 40V Max. Brushless 125mm (5”) Slide Switch Angle Grinder delivers cutting speeds up to 40% faster then the 18V
equivalent. Re-designed to withstand harsh conditions the GA005G is highly durable with advanced protection against heat and
dust. The improved heat dissipation capacity allows for continuous heavy duty operation. In addition there are a number of enhanced safety features including Active Feedback Sensors that will shut down the tool in the event of kickback. As well as soft start, anti-restart
and an electric brake that will rapidly stop the wheel rotation for safe user operation.
New optimum charging system built smart to achieve rapid optimum charge.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless 28mm Rotary Hammer delivers high performance with 2.8 joules of hard hitting impact energy.
That impact energy allows you to drill holes in masonry up to a 28mm diameter quickly and efficiently. Anti-Vibration Technology (AVT) actively reduces the tools vibration through a series of count weight mechanisms and vibration absorbing housing. These designs significantly reducing the vibration transferred to the user for more comfortable use of the tool over extended periods of time. Compatible with AWS* the HR001G can be paired with a compatible vacuum for on demand dust extraction. AWS uses Bluetooth to wirelessly power on and off the extraction unit using the tools trigger. In addition the HR001G is compatible with a wide variety of dust management options including the onboard dust extraction system DX12.
AWS Receiver sold separately
The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. The ideal combination of power and speed with drilling speeds up to 35% faster then the equivalent 18V model. The improved performance allows for massive drilling capacities with up to 152mm hole saw and 50mm auger bit capacity. For advanced safety the DF001G is equipped with Active Feedback Sensors automatically shutting down the tool in the event of a kickback. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
The 40V Max. Brushless 9-1/4" fan produces high air volume for optimal performance on the jobsite. With the ability to be powered by Makita's new 40V line batteries, it features compatibility with AC power and comes with the AC adapter.
New optimum charging system built smart to achieve rapid optimum charge.
The Makita Cordless Line Trimmer has an adjustable trimmer head features 5 angled cutting positions for maximum versatility and ease of operation when trimming around obstacles which also rotates 180o to enable easy edge trimming.
FEATURES:
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
New optimum charging system built smart to achieve rapid optimum charge.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless 9-1/4" fan produces high air volume for optimal performance on the jobsite. With the ability to be powered by Makita's new 40V line batteries, it features compatibility with AC power and comes with the AC adapter.
The 40V Max. Brushless 185mm Circular Saw delivers high performance with 6,000rpm cutting speed. With best in class cutting speed the HS003G has the ability to cut up to 20% faster then the equivalent AC model. Enhanced with added safety protection the saw features an electric brake and soft start for added user safety. In addition to these safety features the HS003G is equip with Automatic Torque Drive Technology (ADT) which automatically adjusts rpm and torque according to the load conditions to optimize cutting speed. Compatible with AWS* the HS003G can be paired with a compatible vacuum for on demand dust extraction. AWS uses Bluetooth to wirelessly power on and off the extraction unit using the tools trigger.
* AWS Receiver sold separately
_side_web.jpg "METABO-HPT 28° FRAMING NAILER")
_angle_web.jpg)
Lightweight and well balanced designed tool that is powerful enough to drive 2" - 3-1/2" fasteners into engineered lumber.
This 28-degree Wire Weld Framing Nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. Depend on this 28-degree Wire Weld Framing Nailer for efficiency.
Strong and durable, this nailer will last through the toughest jobs.
Smooth Shank
Fastest drill speed in its class with low vibration and noise level. Ready to tackle any job, with 7.4 ft-lbs of impact energy for high-speed drilling and forcible chipping.
Hammer is a lightweight, low vibration high-performance drill for designed for the daily contractor use.
The DCH133B 20V Max XR Brushless 1" D-Handle Rotary Hammer is a compact light weight high-performance rotary hammer that has a durable German engineered mechanism that delivers 2.6 joules of impact energy. At the heart of this tool is the DEWALT brushless motor and durable rotary hammer mechanism. With its better than corded speed of application, compact size, light weight and balanced design, this hammer can replace your corded tool. The mechanical clutch enhances user control in a bind up situation and can help minimize sudden torque reaction. The DCH133 is dust extraction ready for the D25301D.
Able to handle the toughest cutting jobs, with the 15 amp motor. Has cutting depth lever that adds convenience and facilitates ease of use.
Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts, DEWALT Small Diameter Construction? Saw Blades power through a variety of building materials with ease.
Next generation 7-1/4” 24T Framing Blade with Tracking Point™ Tooth design delivers maximum life and durability with effortless cutting performance. Up Your Cutting Game with this one-of-a-kind Tracking Point™ tooth grind for unmatched cutting performance and efficiency. This is the only 7-1/4” blade on the market to include Tracking Point™ Tooth design; making it is ideal for framers, roofers, remodelers, concrete formers or anyone wanting ultimate cutting performance in pressure treated wood, 2x lumber, plywood, hardwoods & softwoods.
Fastest drill speed in its class with low vibration and noise level. Ready to tackle any job, with 7.4 ft-lbs of impact energy for high-speed drilling and forcible chipping.
Its the only 15" miter saw in the industry. Its built to handle tough jobs and cut through wide stock. Its a presice tool that is incredibly easy to use.
Ideal for ripping, crosscutting, and mitering in fiber cement boards and siding Is self-sharpening, long-lasting polycrystalline diamond tips.
Its the only 15" miter saw in the industry. Its built to handle tough jobs and cut through wide stock. Its a presice tool that is incredibly easy to use.
With Flexvolt technology, this saw offers flexible power options, it can run corded for unlimited runtime or cordless for unlimited portability.
The M18 FUEL™ 10" Dual Bevel Sliding Compound Miter saw was designed to meet the demanding needs of professional carpenters and remodelers. Delivering greater capacity than many corded 10" sliding miter saws and the POWERSTATE Brushless motor delivering corded cutting performance. The M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 Battery battery pack delivers up to 400 cuts per charge making the saw capable of lasting an entire day on site with only one pack.
Comfortable bi-material handle.
Tool has a large fastener capacity, which means fewer reloads and less downtime. The dual trigger makes the NP35A safe, but makes for accurate placement of fasteners. There is a reload indicator for easy visual recognition of low nail quanties, so you can avoid dry firing.
19% greater pin capacity over competitive models for a wider range of fasteners
This nailer can fire both headed and headless pins, which makes this nailer perfect for finishing.
Built with industrial strength, this headless pin nailer that is perfect for applications in finishing and woodworking. It can use from 1/2" up to 2" headless strip collated pins.
Lightweight and well-balanced at 4.6 lbs for excellent maneuverability. Narrow design for ease of use in tight spaces.
Lightweight and unique design to reach the tightest corners.
If you need a compact, dedicated fastener length metal connector nailer for your jobs, then the JoistPro™150XP is the nailer for you! The nosepiece design provides accurate nail placement into pre-punched connector holes. Its lightweight and ergonomically balanced. Using 34? angled paper tape heat treated nails.
Lightweight and well balanced for easy maneuverability.
This Coil Roofing Nailer has a durable aluminum housing and a one-door loading system for fast reloading. It has a dry-fire lock out to prevent dry firing and to alert the user to reload the magazine. Depend on this Coil Roofing Nailer for durability and comfort.
A well balanced, ergonomic design means less fatigue for the user.
Step up to the tough and dependable RoofPro?445XP Coil Nailer
The Metabo NV65AH2 coil siding nailer brings power, precision and convenience to the jobsite and weighs only 4.8 lbs
This 15-degree Coil Siding Nailer is designed for wire weld and plastic inserted coil nails. Quickly and conveniently set nails to the desired depth. Depend on this 15-degree Coil Siding Nailer for a lightweight and durable construction.
Powerful tool used in a variety of commercial applications, and takes both wire and plastic collated nails.
Step up to the tough and dependable RoofPro?445XP Coil Nailer
