Active Response Technology mitigates injury to user in case of blade contact, dropping the blade under the table with no blade damage. Easy system reset takes less than 60 seconds after blade drop, with no damage to the blade. Dual-activation cartridge unit uses two single-shot cylinders for two separate activations with each cartridge.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that delivers straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Wire Wheels feature the X-LOCK mount and offer a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. This high-quality crimped tempered steel features maximum wire density for long life, to de-burr gears, remove oxides, scale, flash, and for edge blending. Bosch cable-knotted, stringer bead and crimped wire wheels are ideal for deburring metal, bead weld prep, cleaning welds, edge blending and more. The precision-balanced wheel and robust construction allows for professional applications.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that delivers straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Wire Wheels feature the X-LOCK mount and offer a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. This high-quality crimped tempered steel features maximum wire density for long life, to de-burr gears, remove oxides, scale, flash, and for edge blending. Bosch cable-knotted, stringer bead and crimped wire wheels are ideal for deburring metal, bead weld prep, cleaning welds, edge blending and more. The precision-balanced wheel and robust construction allows for professional applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
Bosch's metal-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
Bosch's metal-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that delivers straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Wire Wheels feature the X-LOCK mount and offer a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. This high-quality crimped tempered steel features maximum wire density for long life, to de-burr gears, remove oxides, scale, flash, and for edge blending. Bosch cable-knotted, stringer bead and crimped wire wheels are ideal for deburring metal, bead weld prep, cleaning welds, edge blending and more. The precision-balanced wheel and robust construction allows for professional applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
Bosch's metal-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.
Bosch's metal-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.
Bosch's metal-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.
Bosch's metal-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that delivers straight smooth cuts with less wobble. This stability helps result in longer blade life.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that delivers straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Wire Wheels feature the X-LOCK mount and offer a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. This high-quality crimped tempered steel features maximum wire density for long life, to de-burr gears, remove oxides, scale, flash, and for edge blending. Bosch cable-knotted, stringer bead and crimped wire wheels are ideal for deburring metal, bead weld prep, cleaning welds, edge blending and more. The precision-balanced wheel and robust construction allows for professional applications.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.
Bosch's metal-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This continuous rim diamond blade is designed for fast, clean cuts in most common ceramic and stone tile materials. These blade provides an optimized mix of select quality diamonds, to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that delivers straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Wire Wheels feature the X-LOCK mount and offer a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. This high-quality crimped tempered steel features maximum wire density for long life, to de-burr gears, remove oxides, scale, flash, and for edge blending. Bosch cable-knotted, stringer bead and crimped wire wheels are ideal for deburring metal, bead weld prep, cleaning welds, edge blending and more. The precision-balanced wheel and robust construction allows for professional applications.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.