Calgary: #6, 5940 - 30th Street SE | 403-279-1043
calgary@primefasteners.ab.ca
calgary@primefasteners.ab.ca
DEWALT-built high power, high efficiency brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
20V MAX* XR® COMPACT Reciprocating Saw is a lightweight, compact saw designed to make cutting in between studs and in other tight spots easier than with traditional reciprocating saws. The brushless motor helps to provide up to 2.5x more run time** to get the job done. With a 1-1/8" stroke length and a variable speed trigger delivering up to 2,900 strokes per minute, this saw is fast and efficient. It also features a keyless, lever-action 4-position blade clamp for quick and easy blade changes in four directions for a variety of applications including flush cutting.
The 20V MAX* XR Cordless Compact Router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LED lights help to illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base change.
The DCF620B 20V MAX* XR® Li-Ion Brushless Drywall Screwgun is fast, powerful, and ergonomic so that professionals can work most efficiently.
DEWALT-built high power, high efficiency brushless motor delivers up to 75% more runtime vs. 18vNiCad brushed motors. LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
Features:
The DCF899B 20V MAX* XR® Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.
The DC9096 18V XRP™ Battery Pack has 25 percent more run-time and powers DEWALTS®line of 18V tools, not including Univolt tools.
The DCB205 20V MAX* Premium XR® 5.0Ah Lithium Ion Battery Pack provides immediate feedback on state of charge with the 3-LED Fuel Gauge System and has a lightweight design for easy transporting.
The DCF887B 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in the dark.
The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN662 20V MAX* XR 16 GA Cordless Straight Finish Nailer drives 16 Gauge straight finish nails from from 1-1/4" to 2-1/2" which makes it ideal for fastening baseboards, door/window casing, and crown molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN662 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless.
The DCF889B 20V MAX* Lithium Ion 1/2" High Torque Impact Wrench is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.
The DCF899B 20V MAX* XR® Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.
The DCF880B 20V MAX* Lithium Ion 1/2" Impact Wrench is comfortable to grip with a compact and lightweight design to reach tight spaces and increase productivity.
The DCF887B 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in the dark.
The DCF899B 20V MAX* XR® Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.
This brushless small angle grinder requires no time changing brushes, and offers a longer motor life. It offers a high level of protection. Its break stops the wheel in 2 seconds or less. The Kickback Break engages maximum force to stop the wheel when there is a pinch, stall, or bind-up to reduce kickback. The grinder will also shut off in those events to further protect the user. Battery and charger sold separately.
The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
This brushless small angle grinder requires no time changing brushes, and offers a longer motor life. It offers a high level of protection. Its break stops the wheel in 2 seconds or less. The Kickback Break engages maximum force to stop the wheel when there is a pinch, stall, or bind-up to reduce kickback. The grinder will also shut off in those events to further protect the user. Battery and charger sold separately.
20V MAX* XR® COMPACT Reciprocating Saw is a lightweight, compact saw designed to make cutting in between studs and in other tight spots easier than with traditional reciprocating saws. The brushless motor helps to provide up to 2.5x more run time** to get the job done. With a 1-1/8" stroke length and a variable speed trigger delivering up to 2,900 strokes per minute, this saw is fast and efficient. It also features a keyless, lever-action 4-position blade clamp for quick and easy blade changes in four directions for a variety of applications including flush cutting.
DEWALT-built high power, high efficiency brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
The 20V MAX* XR Cordless Compact Router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LED lights help to illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base change.
The 20V MAX* XR Cordless Compact Router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LED lights help to illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base change.
DEWALT-built high power, high efficiency brushless motor delivers up to 75% more runtime vs. 18vNiCad brushed motors. LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
Features:
The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DCH133B 20V Max XR Brushless 1" D-Handle Rotary Hammer is a compact light weight high-performance rotary hammer that has a durable German engineered mechanism that delivers 2.6 joules of impact energy. At the heart of this tool is the DEWALT brushless motor and durable rotary hammer mechanism. With its better than corded speed of application, compact size, light weight and balanced design, this hammer can replace your corded tool. The mechanical clutch enhances user control in a bind up situation and can help minimize sudden torque reaction. The DCH133 is dust extraction ready for the D25301D.
The DCB205 20V MAX* Premium XR® 5.0Ah Lithium Ion Battery Pack provides immediate feedback on state of charge with the 3-LED Fuel Gauge System and has a lightweight design for easy transporting.
The DCF887B 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in the dark.
The DEWALT DCN662 20V MAX* XR 16 GA Cordless Straight Finish Nailer drives 16 Gauge straight finish nails from from 1-1/4" to 2-1/2" which makes it ideal for fastening baseboards, door/window casing, and crown molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN662 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless.
The 20V MAX* XR Cordless Compact Router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LED lights help to illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base change.
The DCH133B 20V Max XR Brushless 1" D-Handle Rotary Hammer is a compact light weight high-performance rotary hammer that has a durable German engineered mechanism that delivers 2.6 joules of impact energy. At the heart of this tool is the DEWALT brushless motor and durable rotary hammer mechanism. With its better than corded speed of application, compact size, light weight and balanced design, this hammer can replace your corded tool. The mechanical clutch enhances user control in a bind up situation and can help minimize sudden torque reaction. The DCH133 is dust extraction ready for the D25301D.
The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN662 20V MAX* XR 16 GA Cordless Straight Finish Nailer drives 16 Gauge straight finish nails from from 1-1/4" to 2-1/2" which makes it ideal for fastening baseboards, door/window casing, and crown molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN662 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless.
Electrogalvanized
Electrogalvanized
Electrogalvanized
The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
This brushless small angle grinder requires no time changing brushes, and offers a longer motor life. It offers a high level of protection. Its break stops the wheel in 2 seconds or less. The Kickback Break engages maximum force to stop the wheel when there is a pinch, stall, or bind-up to reduce kickback. The grinder will also shut off in those events to further protect the user. Battery and charger sold separately.
20V MAX* XR® COMPACT Reciprocating Saw is a lightweight, compact saw designed to make cutting in between studs and in other tight spots easier than with traditional reciprocating saws. The brushless motor helps to provide up to 2.5x more run time** to get the job done. With a 1-1/8" stroke length and a variable speed trigger delivering up to 2,900 strokes per minute, this saw is fast and efficient. It also features a keyless, lever-action 4-position blade clamp for quick and easy blade changes in four directions for a variety of applications including flush cutting.
The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
This brushless small angle grinder requires no time changing brushes, and offers a longer motor life. It offers a high level of protection. Its break stops the wheel in 2 seconds or less. The Kickback Break engages maximum force to stop the wheel when there is a pinch, stall, or bind-up to reduce kickback. The grinder will also shut off in those events to further protect the user. Battery and charger sold separately.
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN682 18 Gauge Flooring Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" making it ideal for installing solid and engineered hardwood ranging in thickness from 3/8" to 5/8". A contact arm optimized for flooring, along with a tool-free adjustable base, help to drive fasteners accurately at the proper angle and depth. A brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery make the DCN682 ready to go to work without the hassle of using gas, a compressor, or a hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
This brushless small angle grinder requires no time changing brushes, and offers a longer motor life. It offers a high level of protection. Its break stops the wheel in 2 seconds or less. The Kickback Break engages maximum force to stop the wheel when there is a pinch, stall, or bind-up to reduce kickback. The grinder will also shut off in those events to further protect the user. Battery and charger sold separately.
20V MAX* XR® COMPACT Reciprocating Saw is a lightweight, compact saw designed to make cutting in between studs and in other tight spots easier than with traditional reciprocating saws. The brushless motor helps to provide up to 2.5x more run time** to get the job done. With a 1-1/8" stroke length and a variable speed trigger delivering up to 2,900 strokes per minute, this saw is fast and efficient. It also features a keyless, lever-action 4-position blade clamp for quick and easy blade changes in four directions for a variety of applications including flush cutting.
The 2x 20V MAX* 3-in-1 Cordless Lawn Mower is powered by (2) 20V MAX* batteries to deliver 2x the voltage. The high-output brushless motor delivers powerful performance and increases torque in high overgrowth. The lawn mower's 3-in-1 capability allows for mulching, bagging, or rear clipping discharge. It is perfect for properties up to 1/4 acre. For optimal performance, the battery-powered lawn mower can be paired with high capacity 20V MAX* DEWALT batteries or FLEXVOLT® 20V/60V MAX* batteries for extended runtime and maximum compatibility across DEWALT battery systems. This cordless lawn mower is designed to help you get the job done with a 20 in. metal deck, quick and easy single lever height adjustment, and folding handles for compact upright storage.
This 20V MAX* 14 in. String Trimmer features an innovative folding hinge mechanism that reduces the length by 40%** for accessible storage and quick portability. The QuickLoad™ Spool allows for fast and easy line replacement of the DEWALT 0.080 in. line. The 14 in. swath gives a large cutting radius for knocking down wide sections of overgrowth in one pass. The variable speed trigger offers precise power control, as well as performance and runtime management with the Hi/Lo speed control switch.
The 20V MAX* Brushless Handheld Blower provides the ability to clear debris with an air volume of up to 400 cubic feet per minute at 90 miles per hour. With an ergonomic and extremely lightweight design (7.1 lbs. with 20V MAX* 5.0Ah battery--DCB205), the blower is easy to control and minimizes stress on the arm. The variable speed trigger and speed lock give the user full power control.
Suitable For Lawns Up To 575 square meters (Approx. 6,200 square feet)
This lightweight Makita Blower is powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. It has a 6-stage air volume/velocity settings by dial with variable speed control by trigger. Works great for removing dust, dirt, leafs and snow with an amazing 120 MPH and 473 CFM operation.
The M18 FUEL™ Blower has the power to clear from 15 ft, gets to full throttle in under 1 second, and is up to 4 lbs lighter than competitors. Designed to meet landscape maintenance professional needs, the POWERSTATE™ Brushless Motor and REDLITHIUM™ HIGH DEMAND™ 9.0 Battery (sold seperately) deliver 450 CFM and 120 MPH output. The blower features a variable speed trigger and high/low speed settings for increased control. The high setting is for the most demanding applications and low is optimized for clearing debris from flower beds without moving mulch. The lock on button allows the blower to be locked on to full throttle, so the operating hand can be relaxed reducing fatigue. The M18 FUEL™ Blower is fully compatible with 150+ solutions on the M18™ system.